Category Archives: Steel Fabrication

Learning About Metal Fabrication

Metal fabrication is an extremely sought after trade in many industries.

Likewise with specific trades, metal fabrication takes time; and learning the methods of working with metal, training through college and apprenticeships are necessary.

If you are looking for a career in metal fabrication, it is important for you to learn the correct techniques to ensure you are prepared and have the appropriate knowledge for a job in the metal fabrication field.

Continue reading

Steel fabrication process

As steel is such a versatile material, there are a wide range of stainless steel fabricating techniques. 

In order to understand the benefits of the different types of stainless steel fabrication, we should take a look at the processes behind steel fabrication.

Stainless steel, although having a relatively high strength and work hardening rate, is malleable enough to be manipulated; bent, deep drawn, folded, machined, spun or welded.

Work hardening

The process of work hardening is strengthening the material through deformation. Relative to other varieties of steel, any stainless steel work will harden quickly, however, the rate will depend on the specific grade of the alloy.

It will be useful to match the steel grade with a work hardening treatment that is suitable. As austenitic stainless steel is often only hardened only through cold working a treatment process with thermal properties would best be applied to other grades such as those in the martensitic family.

The magnetism of stainless steel can be increased through work hardening. Steel’s magnetism does tend to be relatively slight, however, the higher work hardening rates exhibit higher levels of magnetic capacity following the treatment.

For further information about Taylor Engineering – steel fabricators Birmingham – please visit the website!

 

Steel fabrication

Steel fabrication is the name given to the process of bending, cutting and shaping steel alloy to create a product.

Cutting would be done by sawing, shearing, or chiselling (all with manual and powered variants); torching with hand held torches (including oxy-fuel torches or plasma torches) and through numerical control cutters, using either a laser, torch or water jet.

Bending is the process of hammering (either powered or by hand) or through press brakes and other similar tools. More recent techniques will use press brakes to either coin or air-bend a metal sheet into a desired form. CNC-controlled back-gauges will use any hard stops in order to position cut parts to then place bend lines in the appropriate position. CNC-controlled press brakes can now be programmed to be seamless and efficient through off-line programming software.

The assembly will be done by binding with adhesives, threaded fasteners, riveting, welding or more bending in the form of a crimped seam. Structural steel and sheet metal are the typical beginning materials for fabrication, along with the welding wire, flux, and fasteners that will join the cut pieces together. The end product from fabrication could be called a fabrication.

Frequent raw metals that are utilised by metal fabricators are:

– Plate metal
– Formed and expanded metal
– Tube stock
– Welding wire/welding rod
– Casting

Please visit our website to view out steel fabrication services and our other engineering services.

Steel fabrication: a history

A look into the history of steel fabrication…

There are a number of inventions throughout human history that a number of people would mark down as the most important; the wheel, the written word, books, transport, the Internet… One thing that is often overlooked, that’s been around for nearly as long as the written word, is steel fabrication. It was a major development in its day, allowing humans to create better tools, weapons, armour and more. Hunters would make better arrowheads to bring home more food and countries would use the technique to build their armies, but in the modern day, what exactly is steel fabrication used for?

It’s not uncommon to see steel fabrication at work in a number of huge industries in the modern day, which cover all forms of products. Examples of these industries are:

  • Technology
  • Arts and crafts
  • Manufacturing
  • Jewellery

Steel fabrication was one of the leading techniques of craftsmanship and the creation of weapons and tools in order to develop society. The technique proved so versatile that it led to somewhat of a specialisation. In the past, it wasn’t uncommon for miners to process ore into steel, allowing the steel to be turned into weapons or tools that they could sell on for profit.

In the modern industries, there are a number of different steps you can take in order to get ore from the earth and turn it into goods that can be used by millions worldwide. There are a number of types of metals that we use in our day to day lives, all of which are produced from the fabrication process. For example:

Iron and steel are often found in electronic appliances, devices and cars.

Silver is used in both electronic parts and ornamentation.

Gold is used in ornamentation, but it is also a vital part of some electrical equipment, due to the metals being a great conductor of electricity.

Contact us today to discuss your steel fabrication options or visit our website for more info!